• Benefits of Natural Stone Tiles

    Natural stone tiles are the best pick for kitchen flooring on account of many reasons. These tiles are made out of natural stones such as travertine, marble, sandstone, limestone etc. Since these tiles are made of natural stone, two tiles can never look the same. Below are some more benefits of this material:

    Elegant and Beautiful:

    Natural stone tiles are elegantly beautiful and add a sublime touch to your kitchen. It is quite difficult to find a natural stone that meshes perfectly with the rest of your kitchen design and colours. So if you are meticulous about the look and feel of your kitchen, give a thought to these fantastic tiles.

    Safe and Easy to clean:

    Natural stone has a textured surface, hence it gives you a non slippery surface, unlike other materials. These tiles are easy to clean as well.


    Longevity is another advantage of these tiles, which makes them the first choice. These tiles can withstand heavy foot traffic for years without succumbing to wear and tear.

    Enquire Today

  • Laying Concrete Pavers

    Here are some useful DIY (do it yourself) tips and tricks of laying concrete pavers that will ensure longevity and sustainability of the property.

    1.Detailed Planning-

    In depth planning will not only help you save time and money, but it will also ensure that your work is done according to your expectations. Do not assume that everything will turn out just fine. To begin with you know how much material will be required. It will also save you from wasting some extra dollars, just in case that much of material is not required.

    2.Base Area-

    Base area decides the fate of the work carried out by you. There should be enough depth for layering to ensure longevity of paving. Levelling must not be forgotten before creating a bed. You can go for a 75 mm layer. Make sure that no utility lines are damaged while preparing the foundation.

    3.Preparing concrete mix-

    Preparing concrete mixture is another important step that should not be undervalued. Making a mistake here can lead to consequences that cannot be undone. 1, 2,3 rule can come in handy. This means, that you need to mix 1 part cement, 2 parts sand and 3 parts aggregate. You should be quite careful while mixing water as adding more than required water will lead to less strength and durability.

    Enquire Today

  • Cleaning and Sealing of Travertine

    Before you get down to sealing, it is very important for you to understand the purpose of it. The idea is to prevent it from stains. It is therefore very important to clean it before you seal it.

    In order to clean the floor, you can use a dust mop. You can also vacuum it, however you should never use one with a beater bar.

    You can use a stone cleaner for cleaning, but it should be in accordance with the instructions given by the manufacturer. Also rinse clean the area without overwetting it.

    You must make sure that the floor is completely dry before you start with the sealing process.

    The next step is to choose a sealer. Like sealers for concrete pavers , sealers for travertine are either impregnating or topical. The former doesn’t change the appearance while the latter does. Sealers are either solvent or water borne. You can get this information from the dealer. If it is solvent, you can wipe it on and remove the excess. Water borne sealer must be carefully removed as it can leave behind a hard to remove residue.

    Leave the sealer for 5-10 minutes, wipe off the excess one and allow it to dry for about 2 hrs. To check whether another coat of sealer needs to be applied or not, sprinkle a few drops of water on the surface. If you see bubbles, it doesn’t need any more coating.

    Whether it is concrete pavers or travertine, sealants reduce frequent periodic maintenance which makes your life easy.

    Enquire Today